Friday, February 24, 2017

Egyptian Pre Columbian Figurine Ushabtiby ArtDisplayEssentialshttps://t.co/OYHChtHhTW via @Etsy pic.twitter.com/xtapsuuhHu
— Eloise W (@liveartloud1031) February 24, 2017

Wednesday, February 22, 2017

Caliper Stands

Mineral Ornament Gem Shell Coin Display by ArtDisplayEssentialshttps://t.co/Brw6Lg0m8I via @Etsy pic.twitter.com/fPgWEiXQ2i
— Eloise W (@liveartloud1031) February 22, 2017
Essentials Barriers around a car at the Indianapolis Motor Speedway. https://t.co/nuFkM8z0DX #artdisplay https://t.co/UW9zXWUxKL
— Eloise W (@liveartloud1031) February 22, 2017

Tuesday, February 21, 2017

Nicolas Reid Easels

 
Decorative Metal Easel Display Stand Iron by ArtDisplayEssentialshttps://t.co/RnPUrR9kaK via @Etsy pic.twitter.com/4rcmLhib1Q
— Eloise W (@liveartloud1031) February 21, 2017

Brass Easel


Decorative Brass or Nickel Plated Easel by ArtDisplayEssentialshttps://t.co/1HTnTBGr2u via @Etsy pic.twitter.com/injfU1bfvY
— Eloise W (@liveartloud1031) February 21, 2017

Monday, February 20, 2017

Spider Mount

Mineral Crystal Oil Lamp Artifact Display by ArtDisplayEssentialshttps://t.co/k40f43tM1U via @Etsy pic.twitter.com/4kIcSNuR9m
— Eloise W (@liveartloud1031) February 20, 2017

Q-Cord

San Francisco Museum of Modern Art (SFMOMA)
The Q-cord retractable stanchion system is the new definition of convenient architectural crowd control.
The Q-cord is a retractable barrier that comes with 7 feet of cord. It has a beautiful brushed stainless steel exterior and made with marine grade components. It is easy to set up and rearrange and is mountable in wall, on wall, in floor, on floor, or freestanding. It is made in the USA and is designed to exceed ADA requirements.
Signage is available in three sizes and must be used with a signage cap which comes in 60 degrees or vertical.
San Francisco Museum of Modern Art (SFMOMA)
 
Westfield World Trade Center


Museum barriers are typically used to queue and control visitors throughout a museum or institution. Taller barriers are usually used for directing foot traffic in a particular path or direction. Shorter barriers can be used for surrounding items such as works of art to keep visitors from touching or getting too close. There are a number of barrier options that can be used, such as belts or ropes, but most museums prefer the more refined sophisticated approach of a straight cord. This gives a nice clean look that does not distract from the object being viewed. Museum barriers should also adhere to ADA (Americans with Disabilities Act) standards. The belt or cord on a typical barrier is too high. According to the ADA, the cord or belt must be cane detectable and located within 27 inches off of the finished floor or ground.
The new Q-Cord Retractable Barrier is made by 10-31 Inc., which is one meter(39.375") high and has two retractable cords. The lower cord is half a meter(19.75”) off of the ground to be ADA compliant.
 
Below is the info from the ADA website:
From 2010 ADA Standards for Accessible Design2
307 Protruding Objects
307.1 General. Protruding objects shall comply with 307.
307.2 Protrusion Limits. Objects with leading edges more than 27 inches (685 mm) and not more than 80 inches (2030 mm) above the finish floor or ground shall protrude 4 inches (100 mm) maximum horizontally into the circulation path.
EXCEPTION: Handrails shall be permitted to protrude 4 1/2 inches (115 mm) maximum.
Advisory 307.2 Protrusion Limits. When a cane is used and the element is in the detectable range, it gives a person sufficient time to detect the element with the cane before there is body contact. Elements located on circulation paths, including operable elements, must comply with requirements for protruding objects. For example, awnings and their supporting structures cannot reduce the minimum required vertical clearance. Similarly, casement windows, when open, cannot encroach more than 4 inches (100 mm) into circulation paths above 27 inches (685 mm).

Large T-Arm Mask Display

Mask Artifact Display Stand Holder TA-127B by ArtDisplayEssentialshttps://t.co/9PwK5fyE6D via @Etsy pic.twitter.com/eOO3UPzt0n
— Eloise W (@liveartloud1031) February 20, 2017

Adjustable Plate Stand

Monday, February 13, 2017

Q-Cord Barriers

San Francisco Museum of Modern Art (SFMOMA)
The Q-cord retractable stanchion system is the new definition of convenient architectural crowd control.
The Q-cord is a retractable barrier that comes with 7 feet of cord. It has a beautiful brushed stainless steel exterior and made with marine grade components. It is easy to set up and rearrange and is mountable in wall, on wall, in floor, on floor, or freestanding. It is made in the USA and is designed to exceed ADA requirements.
Signage is available in three sizes and must be used with a signage cap which comes in 60 degrees or vertical.
San Francisco Museum of Modern Art (SFMOMA)
 
Westfield World Trade Center


Museum barriers are typically used to queue and control visitors throughout a museum or institution. Taller barriers are usually used for directing foot traffic in a particular path or direction. Shorter barriers can be used for surrounding items such as works of art to keep visitors from touching or getting too close. There are a number of barrier options that can be used, such as belts or ropes, but most museums prefer the more refined sophisticated approach of a straight cord. This gives a nice clean look that does not distract from the object being viewed. Museum barriers should also adhere to ADA (Americans with Disabilities Act) standards. The belt or cord on a typical barrier is too high. According to the ADA, the cord or belt must be cane detectable and located within 27 inches off of the finished floor or ground.
The new Q-Cord Retractable Barrier is made by 10-31 Inc., which is one meter(39.375") high and has two retractable cords. The lower cord is half a meter(19.75”) off of the ground to be ADA compliant.
 
Below is the info from the ADA website:
From 2010 ADA Standards for Accessible Design2
307 Protruding Objects
307.1 General. Protruding objects shall comply with 307.
307.2 Protrusion Limits. Objects with leading edges more than 27 inches (685 mm) and not more than 80 inches (2030 mm) above the finish floor or ground shall protrude 4 inches (100 mm) maximum horizontally into the circulation path.
EXCEPTION: Handrails shall be permitted to protrude 4 1/2 inches (115 mm) maximum.
Advisory 307.2 Protrusion Limits. When a cane is used and the element is in the detectable range, it gives a person sufficient time to detect the element with the cane before there is body contact. Elements located on circulation paths, including operable elements, must comply with requirements for protruding objects. For example, awnings and their supporting structures cannot reduce the minimum required vertical clearance. Similarly, casement windows, when open, cannot encroach more than 4 inches (100 mm) into circulation paths above 27 inches (685 mm).

Monday, February 6, 2017

Link Hangers

The Link Hanger is a very popular solution for hanging larger works of art up to 200 kg in weight and has been designed to accommodate both rebated and flat backed frames. The ‘link’ provides an immensely strong support between wall and frame and automatically bridges the gap that is so often found on older, heavy artworks with large frames.

 

The Link Hanger has a ‘bronzed’ finish that blends quietly with the shadows behind the artwork, and incorporates measures to improve security, allow for adjustment during installation or connect with storage options when not on display.
This fixing also carries the official stamp of approval by the UK Government’s Museum & Galleries Commission.
 
 

 
 
The Link Hanger is formed from steel with an electroplated ‘bronze’ finish. Each set comprises two link hangers. They are 85mm high x 25mm wide.  All that you require to install the Link Hanger is screws to suit your particular artwork. We recommend using a 4mm diameter panhead screw, as these provide a clean smooth finish. If these are not available, then countersunk screws will also work.
When installing rebated frames, we suggest placing the Link Hanger well in from the edge so that it is ‘lost’ in the shadow behind the artwork.

 
 
 
 

 

Fans and Fan Displays

Clear acrylic fan holders have movable arms to hold the fan open and upright. Use the small size for standard sized fan and the larger stand for those special presentation fans.
 

Adjustable Plate Stand

Friday, February 3, 2017